1. In order
to achieve the correct comfort
in the space or zone where
you live, the
selection of the optimal
system capacity is of primary
importance.
2.
A mini-split system has
two main components: an
interior one, the evaporator
and
an external one, the condenser
or condensing unit.
3.
In order to install a Mini-Split
system, it is necessary
to make a penetration through
an exterior wall to allow
the passage of the refrigerant
pipe. It is also necessary
to
carry out the corresponding
electrical wiring from a
power source. It is Equally
important
to consider the disposal
of water from condensation,
it should be routed
to a place where it drains
properly (garden, floor
drain, etc.).
4.
The installation
should be undertaken only
by technical experts in
air conditioning; avoid
losing your warranty.
5.
Make sure that the electrical
connection to the equipment
corresponds to the
specified data on the technical
nameplate data of the equipment;
in case you do
not have a 220V source,
the necessary procedures
must be requested to and
carried out by the Federal
Electricity Commission.
6.
The exterior equipment (condensing
unit or condenser) must
be located where the
discharge air is not obstructed
and over a flat and leveled
surface to prevent vibration
from the equipment to damaging
the components.
7.
When selecting your equipment,
consider a 4 year period
of operating costs to
determine feasibility and
payback, since generally
the most expensive units
consume less energy.
8.
General maintenance should
be performed on the equipment
at least once
a year. Once operating,
the filters should cleaned
with soap and water, since
a dirty
filter obstructs the free
passage of air which, in
turn, translates into higher
operating costs.
9.
It is recommended to select
an optimal zone / space
temperature in the remote
control,
from 22 to 24 °C to
achieve comfort.
10.
Before choosing an air conditioning
system it is necessary to
know the
advantages and potential
drawbacks of each available
system.
Prolongación Av.
San Antonio No. 418 Lote 2, Col. Minas de Cristo, C.P. 01419, Álvaro
Obregón, México D.F., Tel.: (55) 5350-5350 / (800)
022-5180 Contact
UsCYVSA
Group Location
